Technical and environmental effects of concrete production: dry batch versus central mixed plant

Current environmental and economical circumstances accelerate the developments of new concrete constituents. Whereas the process technology impacts the mix-design strategy, it seems obvious that manufacturing process is prone to evolutions. This article presents a method to compare environmental and economical consequences of different technological solutions on the basis of the influence on the cement consumption needed for a given concrete performance. Case study is the choice of dry batch or central mixed concrete production systems for a ready mixed concrete production. The theoretical difference in cement consumption is estimated by considering that the water content fluctuation is by far the dominant factor governing the truck to truck variation. The addition of a mixer is effectively found to contribute to cement reduction. Environmental comparison is performed using an EADT indicator (Environmental Amortization Duration Time) defined in the article, and testing various environmental data. The EADT for energy consumption, released CO₂ and particles are found below 6 years, in the whole range of tested environmental data for an annual production of 40,000 m³ yr^?1, with 2 m³ mixer for the central mixed concrete plant. The NO_x and SO₂ EADT results are found sensitive to the releases of the steel plant. The financial amortization duration time corresponding to the purchase of a mixer, is found less than 2 years. Although the chosen application case is simplified, these results encourage further research.     

The inflow of (238)Pu and (239+240)Pu from the Vistula River catchment area to the Baltic Sea

The aim of the work was to estimate plutonium inflow from the Vistula River’s catchments area to the Baltic Sea. There were differences in plutonium activities depending on season and sampling site. The highest activities of ²³⁸Pu and ^239+240Pu were transported from the Vistula River watershed to the Baltic Sea in spring and the lowest in summer. Annually, the southern Baltic Sea is enriched via the Vistula River with 10.3 MBq of ²³⁸Pu and 89.0 MBq of ^239+240Pu. The enhanced concentration of plutonium in water from the Vistula River is the result of its runoff from the Vistula drainage area, mostly from snowmelt, enhanced rainfalls and leached materials from river bed.     

Dynamic Performance of Horizontal Flexible Anchor Lines During Fall Arrest— A Numerical Method of Simulation

Designing fall arrest systems, which contain horizontal flexible anchor lines is an important technical problem related to the safety of people who work at a height and need horizontal freedom of movement. The article presents a numerical simulation of the dynamic performance of horizontal flexible anchor lines during fall arrest. The model of a 2-component system—a horizontal flexible anchor line and a falling rigid mass, described with a second order non-linear differential equation—is the main element of this method. This method of simulation is realised by a computer program, which allows obtaining the most important data characterising a fall arrest. The article shows laboratory tests used for the verification of this method, which turned out to be a valuable source of information and which can be used for designing fall arrest systems.     

Use of fly ash agglomerates for removal of arsenic

The aim of this work is to investigate the application of fly ash adsorbent for removal of arsenite ions from dilute solution (100–1,000 ppm). Experiments were carried out using material from the “Turów” (Poland) brown-coal-burning power plant, which was wetted, then mixed and tumbled in a granulator to form spherical agglomerates. Measurements of arsenic adsorption from aqueous solution were carried out at room temperature and natural pH of fly ash agglomerates, in either a shaken flask or circulating column, to compare two different methods of contacting solution with adsorbent. Adsorption isotherms of arsenic were determined for agglomerated material using the Freundlich equation. Kinetic studies indicated that sorption follows a pseudo-second-order model. Preferable method to carry out the process is continuous circulation of arsenite solution through a column.     

Model of technological alternatives of production of sodium chromate (VI) with the use of chromic wastes

This article presents a mathematical model which describes the sodium chromate (VI) production process with the use of chromic waste as a substitution of natural raw materials. This model is a function of selected process parameters common for all of the examined alternatives and based on equations of material balance. Optimization of the elaborated technological alternatives of the production process with use of recycling of chromic waste has been evaluated by determining the extreme value of the quality indicator WJ. This indicator defines the quantity of waste created in the process. Optimization results enabled the selection of the optimal technological solution from all of the alternatives possible for use in industrial practice. Negative values of the indicator prove that there is the possibility of introducing to the process a larger quantity of waste than the one obtained in the process and transported to the storage heaps.     

Multi-criteria forest road network planning in fire-prone environment: a case study in Serbia

This paper presents a multi-criteria selection of the best forest road network with the aim of achieving effective preventive and timely repressive protection against forest fires. The research was carried out in national park (NP) “Tara” at a site which is under constant threat of fire. Four variants of the forest road network were designed and analyzed against seven criteria, and the best variant was selected using entropy weight coefficients (EWC) method. The importance of these seven criteria was studied by the management of the NP “Tara.” The greatest importance was given to the criteria relating to the cost of construction and maintenance of permanent and temporary roads (47% of the total value of all criteria). The EWC method did not select the variant based on the lowest costs of construction and maintenance as the best option, but the variant whose location was the most suitable for effective defense against forest fires.     

Temporal changes in the fluoride levels of jaws of European deer in industrial regions of Western Pomerania,Poland

The factories processing natural phosphates and apatites in Poland release into the atmosphere considerable amounts of fluorine compounds. Fluoride is known to accumulate in the hard tissues of animals and humans. This paper describes the determination of fluoride in mandibles of deer in the years 1982 and 1990. In recent years, the establishments have restricted their output and modernized the technology of phosphate fertilizer production. The fluoride content in jaws has decreased, particularly in those animals having their habitat in the vicinity of the two factories.     

The application of an open tubular trap in analysis of organic air pollutants

The paper presents the studies on equilibrium trapping of organic air pollutants. A piece of a commercial capillary chromatographic column coated with polydimethylsiloxane was used for trapping. This kind of the trap was applied for sampling and enrichment of selected volatile nonpolar organic compounds from workplace atmosphere (woodworking shop). In the method developed, which is based on equilibrium trapping the concentration of analytes in a studied medium can be calculated from the partition coefficients determined in a calibration step and the amount of particular analytes trapped. Simultaneously with equilibrium trapping, analytes were sampled into sorbent packed tubes. The concentrations of analytes in woodworking shop atmosphere obtained with both sampling methods (equilibrium and dynamic) were in good agreement.